How to connect the Internet to a computer?
If you have problems connecting, setting up and using universal Internet access in Windows XP, then this article will help you figure out how to connect the Internet through a computer or laptop. Universal access is used when you set up a local network that uses one connection to connect to your Internet. To configure universal connection access, you need to make sure that there is a network card on the server to establish a connection to the internal network and another card (or modem) so that you can connect to the Internet.
Instructions on how to connect the Internet to a computer
- First you need to configure the server. Log in through the administrator or owner account on the server. Click on the “Start” button, then “Control Panel”, click on the “Network and Internet Connections” tab, mark “Network Connections”. Right-click the connection that you are going to use to access the Internet.Click the "Properties" tab, then "Advanced", mark "Shared Internet connection access". Next, in the settings “Allow other network users to use the Internet connection of this computer”, check the special box. If you are using remote access, tick the checkbox “Set call on demand”. Click "OK", then click "Yes".
- We continue to configure the client computer. To connect a computer through a universal connection, you need to check the IP settings of your network card, then configure the client computer. In order to check the settings of your IP, you must perform the following steps. Log in to your computer through your administrator or owner account. Click on the “Start” button, then “Control Panel”, select the “Network and Internet Connections” tab, then select “Network Connections”. Right-click to select "Local Area Connection", and then mark the "Properties" command. In the item “General” find the tab “Internet Protocol (TCP / IP)”, it is in the tab “Components used by this connection”.Click on the "Properties" button, then select the tab "Obtain an IP address automatically."
- Troubleshoot all sorts of problems if they arise during your connection through universal access. This may occur due to the fact that during the use of access when you connect to the Internet, the IP address is usually assigned to the network 192.168.0.1. In order to eliminate the conflict of these addresses, set up on your home computers to obtain an IP address dynamically or assign each one a unique IP. Very often, providers specifically create the user the conditions under which they have to use the maximum services. For example, if you have two or more computers at home, then you may be offered to connect the Internet to each separately. And of course, you will have to pay every point of your access. Costs are large and not justified. But fortunately, there are the cheapest and most reasonable options to connect several of your computers to the Internet.