How to tie a hook to a fishing line?
Watch the video
Good fishing is impossible without good preparation. One of the factors that distinguishes a professional fisherman from an amateur fisherman is the ability to tie a fishing line on a hook. Today we will talk about it, dear reader. Answer the question of how to tie a hook to a fishing line.
We tie a hook to the fishing line
Here is a list of the most common knots that will help you firmly connect the hook and the line to each other:
- Knot-eight is one of the easiest ways to tie a hook to a fishing line. It is a non-tightening loop. This type of knot significantly reduces the possibility of fishing line, which can easily break. If you are the owner of a very high quality dense fishing line, then the use of this type of knot is more than justified.
- The pickup knot is very widely used by fly-flops. In order to tie such a knot, it is necessary to take the end of the fishing line and pass it through the carabiner ring of the spinners.Now make three or four turns of the carabiner around the line, and put the end of the line into the hole between the turns of the line and the ring of the carabiner. Pull the main line and its end in different directions. Thus, the gripping knot is tightened, however, it reduces the tensile strength of the fishing line less.
- We now turn to a more complex node. Do not be intimidated by its complexity, since it is this node that is ready to provide the most convenient and reliable catch. Here's how to hook a fishing line: Pass the free end of the fishing line through the hole of the carabiner spoon. Now repeat this action in such a way as to make a ring. The free end of the fishing line must be passed through the resulting ring and the gap that was formed between the turns of the fishing line and the carabiner ring. To tighten the knot, pull the fishing line by different sides. If the carabiner lure is a smooth ring, then the reliability of such a node is equal to 98%.
Now let's talk about the knots that are used for hooks without spinners:
- The first of the most common knots is the bayonet knot. Pass the end of the line into the ring of the hook. Make two turns around his forearm.Remember that if you use a synthetic fishing line, this knot will slide heavily.
- The Canadian G8 is also very popular among other ways of tying fishing line. This knot is the ideal solution for synthetic fishing line, as it firmly holds the catch. Thread the end of the line through the ring of the hook and make one turn around his forend. Next, you need to send the fishing line in the resulting loop down from the hook ring. The node is ready.
- You need to know that the hook will not exactly untie? Then it is best to use a fishing eight. To do this, take the end of the fishing line and pass it through the ring of the hook. Make one turn around the hook handguard and direct the movement of the end of the fishing line back into the hook ring. Now you need to make a turn around the main line, and then skip the free end through the ring, which turned out on the forearm of the hook.
- We do not know why the next node was called the turtle. However, this type of knot has proven itself very well among high-level fishermen. Turtle knot suitable for cotton woods. When using synthetic fishing line, many faced loss of a hook.Technology tying presented in the picture.
- The California knot is quite simple and it is suitable for tying nylon fishing line. For tying a knot you need to fold the line twice. This design must be threaded into the ring of the hook, and then wrapped around the main line. Thread the hook into the resulting loop, after which the Californian knot will be ready.
- Step knot is advisable to use when fishing with a hook without eyelet (ring). To tie a knot, do the following. The free end of the fishing line once wrapped around the forearm hook in such a way as to press the main part of the fishing line to the hook. Then you need to make a turn around the hook in the same way, directing the line downwards. Now make three turns of the line around the forearm of the hook and the remaining main line so that there is a small loop on the bottom. The last turn of the line around the forearm should capture only one part of the line loop, and then rush into the resulting loop.
Here's how to tie a hook to a fishing line.