Is it worthwhile to install a power bumper on the "Niva Chevrolet"?
"Chevrolet Niva" is an excellent off-roada car for city and country trips. Like any jeep, it perfectly crosses fords and mud ditches. However, the "Niva" has its drawbacks. For off-road lovers, they consist in the design of the front bumper. This piece of plastic can crack at any time. And if the car enters at a speed in the forest and its stopping distance increases several times, only the power bumper on the "Niva" can save from damage. Photos of this part you can see below.
Having installed such a shock element, you can moreDo not be afraid for the safety of your bumper at the slightest damage. Such a car "Chevrolet" with ease will bend the bushes, ride on a complete off road without any fear. But even if you are afraid of planting the car "on the belly," when it zabuksuet, from an unpleasant situation, you can save the winch. It manages almost every power bumper on the "Niva", and not only on domestic brands.
Unfortunately, such an assortment of powerbumpers, as in the case of wheel disks, does not exist. There is only one company that deals with such a thing - "Aventuri". If this does not tell you anything, remember the power bumper "RIF". On the "Niva", UAZ and even some Japanese cars "Aventuri" produces high-quality impact elements. "RIF" was the first power bumper in the domestic market, which solved the problem with the installation of the winch on the front shock elements and stairs or tool box on the rear. And thanks to additional stiffeners and complete absence of welding traces, such a product will be effective even at the most extreme loads. By the way, "RIF" still processes its bumper with several layers of paint, which guarantees a long and trouble-free service without the appearance of rust on the surface.
The only drawback that suchproducts, is their inaccessibility in the Russian market and their high cost. Many people consider the bumper to be a superfluous power element on the Niva, so they only maneuver their off-road vehicles with them. Finding the right accessory for domestic transport is not so easy, while Japanese and American cars are full of such devices. And if you did not find the right power bumper on the "Niva" or simply do not want to overpay 30 thousand rubles for a piece of iron, the only way out of the situation will be its self-manufacturing.
When you start to work, observe allyour calculations and prepare a place for optics in advance. On many cars this place is considered problematic, since each car is individually individual, which complicates the production process. So it turns out that to install a power bumper on the "Niva" from other car brands is pointless, and if also attachments from an imported "miracle" do not fit, then all the work will go "down the drain". In order not to repeat these mistakes, always draw a drawing before your work and preferably draw a future product on paper or in a graphic editor. If this step is done correctly, then you will succeed.